Arms, plates, power tubes, standoffs, screws and nuts for FPV frames, compared by material, size, the frame they are listed for and price.
369DRONE ClinchNut Press-Fit Tool (M3) — read reviewA $1 machined aluminum press-fit tool, paired with an M3 bolt, that the listing says installs M3 ClinchNuts into carbon fiber plates. It suits a builder fitting ClinchNuts to plates, though the listing gives no dimensions, weight or pack contents.
369DRONE Plastic Nut (M3) — read reviewA $1 set of M3 nylon nuts that the listing describes as non-conductive and meant for FC and ESC stack mounting, with 4 pieces per set. It suits a builder who wants nuts for that job, though the listing gives no weight or dimensions beyond M3.
369DRONE Titanium Button Head Screw (M3 x 10mm) — read reviewA titanium button head screw, M3 x 10mm, listed for the PRO Trinity at $2 with a quantity of x4. It suits someone who needs a repair or spare screw of that size for the PRO Trinity; the listing gives no weight or thread detail.
369DRONE Titanium Button Head Screw (M3 x 12mm) — read reviewA $2 titanium button head screw in M3 x 12mm that the listing says is shared by Trinity and TUF Trinity, with a quantity of x4. It suits an owner of either who wants spares, though the listing gives no weight or head size.
369DRONE Aluminum Standoff (M3 x 22mm) — read reviewA $3 set of four aluminum standoffs, M3 x 22mm, which the listing says are designed to secure the top plate of frames like the MIROKU series. It suits a builder who needs standoffs in that size, though the listing gives no weight or frame list.
369DRONE PowerTube 4 (for MIROKU PRO Frame,4mm) — read reviewA $3 set of four PowerTube 4 spacers, 4mm in diameter, which the listing says are made specifically for the MIROKU PRO Frame. It suits an owner of that frame; the listing names no material and gives no weight, though it calls the part ultra-lightweight.
369DRONE PowerTube 5 (for MIROKU Frame,5mm) — read reviewA $3 set of four 5mm-diameter hollow PowerTube 5 spacers that the listing says are designed for the standard MIROKU Frame. It suits owners of that standard frame, though the listing names no material and gives no weight, and its strength and impact claims come without figures.
369DRONE PowerTube 6 (for MIROKU TUF Trinity Frame,6mm) — read reviewA $3 set of four aluminum PowerTubes in 6mm that the listing says are for TUF Trinity and paired with 6 mm-thick arms. It suits an owner converting to TUF Trinity or keeping spares, though the listing gives no weight.
369DRONE Titanium Button Head Screw (M3 x 6mm) — read reviewA $3 titanium button head screw in M3 x 6mm, which the listing says is designed for use with the MIROKU Frame, with 8 pieces per set. It suits an owner of that frame who wants this length, though the listing's strength and weight claims come with no figures.
369DRONE Titanium Flat Head Screw (M3 x 10mm) for MIROKU PRO — read reviewA $3 titanium flat head screw in M3 x 10mm that the listing says is designed for securing the arms on the MIROKU PRO Frame, with 8 pieces per set. It suits an owner of that frame who needs this length, though the listing gives no weight or head size.
369DRONE Titanium Flat Head Screw (M3 x 12mm) for MIROKU — read reviewA $3 titanium flat head screw titled M3 x 12mm for the MIROKU Frame, although its description text repeats M3 x 10mm and the MIROKU PRO Frame. Each set has 8 pieces. It suits an owner who will confirm the length and frame first; the listing gives no weight.
369DRONE Titanium Flat Head Screw (M3 x 30mm) — read reviewA $3 titanium flat head screw in M3 x 30mm that the listing calls countersunk and says is optimized for the MIROKU Frame and MIROKU PRO Frame, with 4 pieces per set. It suits owners of those frames who want a 30mm length, though the listing gives no weight.
369DRONE Top Plate 2mm for MIROKU and MIROKU PRO — read reviewA 2mm carbon fiber top plate that the title calls compatible with both the MIROKU and MIROKU PRO frames, listed at $5 as a single option. It suits an owner of either frame who wants this plate; the page gives the thickness and material but no weight.
369DRONE Arm 4mm for MIROKU PRO Frame — read reviewA 4mm carbon fiber arm that the listing describes as a custom fit for the MIROKU PRO Frame, priced at $6 as one option. It suits a MIROKU PRO Frame owner; the listing says the arm has low crash tolerance and gives no weight figure.
369DRONE Arm 5mm for MIROKU Frame — read reviewA 5mm carbon fiber arm that the listing says was designed specifically for the MIROKU Frame and is front/rear interchangeable, priced at $6 as one option. It suits a MIROKU Frame owner; the page gives no weight or arm length.
369DRONE ClinchNut (M3) — read reviewA $6 set of 12 pieces of ClinchNut, an M3 press-fit nut that the listing says is designed to be installed directly into carbon fiber frames. It suits someone adding M3 nuts to carbon plates; the page does not name the nut's own material.
369DRONE MIROKU X-Brace for Tiny Whoop (Carbon) — read reviewA single carbon fibre X-Brace weighing 0.22 g that the listing calls bolt-on for the BETAFPV Air65 and Air65 II and fittable to the Air65 Champion after trimming, listed at $6. It suits owners of those three frames; screws are not included.
369DRONE PRO Trinity Arm 4mm for MIROKU PRO Trinity Frame — read reviewA single 4mm carbon arm that the listing describes as a replacement for the PRO Trinity frame, built for 3-point fastening, priced at $6. It suits an owner who wants one arm as a repair or spare for the PRO Trinity Arm Set; mounting screws are not included.
369DRONE Trinity Arm 5mm for MIROKU Trinity Frame — read reviewPriced at $6, this is one 5mm carbon arm for the Trinity frame, which the listing describes as built for 3-point fastening and as a repair or spare for the Trinity Arm Set. Mounting screws are not included.
369DRONE TUF Trinity Arm 6mm for MIROKU TUF Trinity Frame — read reviewA single 6mm carbon arm for the TUF Trinity frame at $6, which the listing calls high-durability and built for 3-point fastening. It suits an owner who wants a replacement or spare arm; mounting screws and PowerTube are not included.
369DRONE Mid Plate 2.0mm for MIROKU PRO Frame — read reviewA 2.0mm carbon fiber mid plate that the listing calls the MIROKU PRO Middle Plate, listed at $9 as a single option. It suits a MIROKU PRO Frame owner; the listing says the plate is lightweight, but the page gives no weight.
369DRONE Mid Plate 2.5mm for MIROKU Frame — read reviewA 2.5mm carbon fiber mid plate listed for the MIROKU Frame at $9 as a single option. The listing calls it the MIROKU Middle Plate and the central link between the top and bottom frames; it suits an owner of that frame, and the page gives no weight.
369DRONE Bottom Plate 2.0mm for MIROKU PRO Frame — read reviewA 2.0mm carbon fiber bottom plate listed for the MIROKU PRO Frame at $11 as a single option. The listing calls it an ultralight base and says it is not crash-oriented; the page gives no weight figure.
369DRONE Bottom Plate 2.5mm for MIROKU Frame — read reviewA 2.5mm carbon fiber bottom plate listed for the MIROKU Frame at $11 as a single option. The listing calls it the MIROKU Bottom Plate and the structural core of the frame; the page gives no weight or hole details.
| Review | Price | Material | Size | Fits |
|---|---|---|---|---|
| 369DRONE ClinchNut Press-Fit Tool (M3) | $1 | Machined aluminum, per the listing text | M3 | — |
| 369DRONE Plastic Nut (M3) | $1 | Nylon | M3 | MIROKU series builds and other standard stack setups, per the listing |
| 369DRONE Titanium Button Head Screw (M3 x 10mm) | $2 | Titanium | M3 x 10mm | PRO Trinity |
| 369DRONE Titanium Button Head Screw (M3 x 12mm) | $2 | Titanium | M3 x 12mm | Trinity / TUF Trinity |
| 369DRONE Aluminum Standoff (M3 x 22mm) | $3 | Aluminum | M3 x 22mm | Top plate of frames like the MIROKU series, per the listing |
| 369DRONE PowerTube 4 (for MIROKU PRO Frame,4mm) | $3 | — | 4mm diameter | MIROKU PRO Frame |
| 369DRONE PowerTube 5 (for MIROKU Frame,5mm) | $3 | — | 5mm diameter | MIROKU Frame (the standard frame, per the listing) |
| 369DRONE PowerTube 6 (for MIROKU TUF Trinity Frame,6mm) | $3 | Aluminum | 6mm | TUF Trinity (MIROKU TUF Trinity Frame in the title) |
| 369DRONE Titanium Button Head Screw (M3 x 6mm) | $3 | Titanium | M3 x 6mm | MIROKU Frame, as the listing says it is designed for it |
| 369DRONE Titanium Flat Head Screw (M3 x 10mm) for MIROKU PRO | $3 | Titanium | M3 x 10mm | MIROKU PRO Frame |
| 369DRONE Titanium Flat Head Screw (M3 x 12mm) for MIROKU | $3 | Titanium | M3 x 12mm (the description text says M3 x 10mm) | MIROKU Frame (the description text names the MIROKU PRO Frame) |
| 369DRONE Titanium Flat Head Screw (M3 x 30mm) | $3 | Titanium | M3 x 30mm | MIROKU Frame and MIROKU PRO Frame, per the listing |