Ampapa 6.35mm TRS Balanced Audio Cable Review
A 1m balanced 6.35mm TRS to TRS cable pair with 6N oxygen-free copper conductors, gold-plated plugs, carbon fiber shells and tinned copper braided shielding.

Our verdict
The Ampapa 6.35mm TRS cable is a $32.99 balanced audio pair for HiFi systems, studios and desktop setups. It uses 6N oxygen-free copper with a 40-strand core, 24K gold-plated plugs with carbon fiber shells, and a three-layer shield stack (tinned copper braid, cotton yarn, inner wrap) to keep RF, EMI and handling noise out. The nylon-braided jacket is rated for 15,000-plus bends. It comes only in a 1m pair with 6.35mm TRS on both ends - universal for balanced TRS gear, but plan for adapters if your chain is XLR or 3.5mm.
- Best for
- Owners of balanced 6.35mm TRS gear - Ampapa Q1/D1 and similar - who want a shielded, durable OFC cable pair at a modest price.
- Skip if
- You need runs longer than 1m, use XLR or 3.5mm connections throughout, or only need a single cable.
Why 3.5/5: The page gives connector, core, jacket and length figures and a stated fit for the Ampapa Q1 and D1, for $32.99. Held back by claims with no measurements, a single 1m length and no conductor gauge or capacitance figure.
The Ampapa 6.35mm TRS to TRS cable is a balanced audio interconnect priced at $32.99 for a pair. It is aimed at audiophiles, studio users and content creators who need clarity and consistency in balanced signal paths, whether completing an Ampapa system or upgrading any 1/4-inch balanced setup.
The conductor is 6N oxygen-free copper, chosen to preserve clarity and depth and reveal richer textures and wider dynamics, with a 40-strand copper core. Plugs are 24K gold-plated with carbon fiber shells to reduce contact resistance and maintain sonic integrity in high-resolution playback.
Noise rejection comes from layers: tinned copper braided shielding resists RF and EMI interference, while cotton yarn and a layered inner wrap reduce vibration-induced handling noise, and a matte compound jacket adds static protection. The build is rated to endure over 15,000 bends, using cotton-filled strain relief and a 6.5mm nylon braid that resists twisting while staying flexible enough for desktop, rack and other routing.
The cable is tuned for the Ampapa Q1 and D1, yet works with other mixers, preamps, CD players, audio interfaces, studio monitors and AV receivers - any 1/4-inch balanced TRS interface. It is sold as one pair in a 1m / 3ft length, with 6.35mm TRS male connectors on both ends, so devices with XLR or 3.5mm jacks will need adapters.
Specifications
| Spec | Page says |
|---|---|
| Brand | Ampapa |
| Connector A | 6.35 mm TRS Male |
| Connector B | 6.35 mm TRS Male |
| Connector gender | Male to Male |
| Connector | 24K gold-plated |
| Wire core | 6N oxygen-free copper |
| Jacket | Nylon-braided PVC |
| Nylon braided | 15000+ Bendings |
| Cable length | 1m & 3ft |
| Packing list | 1/4" TRS to TRS Cable x1 Pair |
How it compares
The TRS-to-TRS cable is the plain balanced link in this group. The Ampapa 1/4-Inch TRS to XLR Female Balanced Cable review ($36.99, $4.00 more) is also sold as a pair at 1m (3.3ft), with the same 6N oxygen-free copper and 24K gold plating, but one end is a 3-pin XLR female, so it is for gear with XLR jacks. Choose this TRS cable when both devices have 6.35mm TRS jacks, such as the Ampapa Q1 and D1 the page names, and the XLR version when one end is XLR.
Against the RCA option, the Douk Audio HiFi Dual RCA to RCA Stereo Cable review ($29.99, $3.00 less) lists the same 6N oxygen-free copper, 24K gold plating, tinned copper braid, 15,000+ bend rating and 1m (3.3ft) length, but it joins RCA jacks rather than balanced 6.35mm TRS ones. It costs $3.00 less and suits RCA-only equipment; the TRS cable is the one for balanced 6.35mm gear.
Shipping, returns and warranty
- Shipping: Douk Audio's current shipping page says orders are generally processed no later than the next business day and arrive in 2-8 business days, with duties, taxes and customs fees included in the checkout price unless noted otherwise.
- Older shipping terms are still online: airmail at 10-25 days for parcels under 2 kg, DHL, UPS or FedEx at 5-8 days above that, and a line saying the store is not responsible for import duties. Check the delivery estimate and any duties at checkout.
- Returns: ask within 30 days of delivery and wait for approval before sending anything; an approved return has to ship within 7 days. Items need all packaging and accessories and no excessive wear, or the store can refuse them or refund part of the price. Refunds go to the original payment method after inspection.
- Not refunded: original and expedited shipping, duties, taxes and customs charges, unless the law requires it or the store made the error. The return page does not say who pays return postage, and the older refund page excludes mistaken orders and change-of-mind returns from free after-sale service.
- Warranty: 24 months from purchase for manufacturing defects, with free repair, a replacement unit and free shipping both ways for covered repairs. Drops, liquid, DIY repairs, lightning, extreme temperatures and misuse are excluded (partial fees may apply), and damage from weak packing on the way back may not be covered. The older refund page still says 1 year.
- Seller: the site is run by Shenzhen Anba Technology Co., Ltd (Shenzhen, China) and HONGKONG LONGSHENG Import and Export Trading Co., Limited (Hong Kong); support is by email at [email protected]. These terms cover orders placed on doukaudio.com; other sellers apply their own.
For this product, the page lists US, UK, EU, AU and Other under 'Shipping to' and shows Free Shipping, 2-8 Days Arrival, 30-Day Return and 2-Year Warranty badges near the price.
What we liked
- Balanced 1/4-inch TRS to TRS design for stable, consistent signal transmission in HiFi, studio and content-creation setups
- 6N oxygen-free copper conductors and 24K gold-plated plugs preserve clarity and depth while reducing contact resistance
- Multi-layer shielding - tinned copper braid, cotton yarn and layered inner wrap - resists RF and EMI interference and handling noise
- Built to endure over 15,000 bends with a 40-strand copper core and cotton-filled strain relief
- Tuned for the Ampapa Q1 and D1 but universally compatible with mixers, preamps, CD players, audio interfaces and AV receivers with 1/4-inch balanced TRS jacks
Worth noting
- Only one length is offered: 1m / 3ft, which may be short for longer rack or desk runs
- Both ends are 6.35mm TRS - gear with XLR or 3.5mm connections needs adapters
- Sold only as a pair, so single-cable buyers pay for two
Questions before you buy
What is this cable for?
Transmitting balanced audio between 6.35mm (1/4-inch) TRS interfaces - ideal for audiophiles, studio users and content creators, and tuned for the Ampapa Q1 and D1 while remaining universally compatible.
What is it made of?
6N oxygen-free copper conductors with a 40-strand core, 24K gold-plated connectors with carbon fiber shells, tinned copper braided shielding plus cotton yarn and layered inner wrap, and a 6.5mm nylon-braided PVC jacket.
How long is the cable, and how many do I get?
It is 1m / 3ft long and sold as one pair of 1/4-inch TRS to TRS cables, male to male.
Will it fit my devices?
It fits any 1/4-inch balanced TRS interface. Devices with XLR or 3.5mm connections require adapters, since both ends of this cable are 6.35mm TRS.
Sources & verification
What this review is based on and the day we last read it. Specs and claims from the maker are the maker’s own; the verdict and the rating are ours.
From the store
- Douk Audio product pagePrice $32.99, parameters (connectors, 6N OFC core, jacket, 15000+ bendings, 1m length), feature text and the packing list (one pair).Read October 25, 2026
- Douk Audio shipping policyOrders are generally processed no later than the next business day, 2-8 business days in transit, duties, taxes and customs fees included at checkout unless notedRead October 25, 2026
- Douk Audio older shipping policyOlder terms still online: airmail 10-25 days under 2 kg, DHL/UPS/FedEx 5-8 days above, store not responsible for import dutiesRead October 25, 2026
- Douk Audio return and refund policy30 days from delivery with prior approval, ship back within 7 days; shipping, duties and taxes not refunded unless the store erredRead October 25, 2026
- Douk Audio older refund policyOlder terms still online: 30-day free return or refund and a 1-year warranty; mistaken orders and change of mind are excludedRead October 25, 2026
- Douk Audio 24-month warranty page24 months from purchase for manufacturing defects: free repair, replacement unit and two-way shipping for covered repairs; lists exclusionsRead October 25, 2026
- Douk Audio contact pageSite run by Shenzhen Anba Technology Co., Ltd and HONGKONG LONGSHENG Import and Export Trading Co., Limited; support emailRead October 25, 2026
What we couldn’t verify
- $32.99 is the price of the US, UK, EU and AU shipping options, and the page opens on it; the 'Other' option is $37.99, which is $5.00 more.
- '6N oxygen-free copper', 'clarity and depth' and 'sonic integrity in high-resolution playback' are page claims; the page gives no resistance, capacitance or shield-coverage figure and no conductor gauge.
- The 15,000+ bend figure comes with no test method or conditions.
- The packing list reads '1/4 TRS to TRS Cable x1 Pair' and the length is given once as '1m & 3ft'; the page does not say whether the pair is two separate 1m cables.
Spotted an error or something out of date? Tell us and we’ll fix it and update the date.


